110V-220V Infrared Sensor Switch, Dual-Use Ordinary Human Body Sensor Switch

Simply replace the switch.

Motion sensor - switches between one or more lights (when the light sensor is on static switch) twilight threshold, switching time 10 seconds - both set to 7 min.

Installs in a wall socket.

Installation

dimensions are WxHxD 49x49x30 mm.

Suitable for 80x80mm.

Ideal for placement next to an entrance door.

Resistance sensor for switching loads such as incandescent bulbs.

Inductive LED Fluorescent or tube 1-200 watts Infrared - Motion/Sensor - Switch/PIR - Direct line-of-sight capture, heat and motion detectors.

Motion detectors, sensors or also known as PIR/passive infrared motion detectors can make our daily lives much easier.

For example, if you're out shopping and your hands are very busy (now a motion sensor instead of a switch), the detector will turn on the light without you having to use it.

Also in hallways, passageways or toilets/sanitary areas.

Once the sensor detects movement, it turns on and off after a predetermined time.

It's that simple.

This 2-wire sensor is a direct replacement for a switch.

2 wires = replace the switch.

3 wires = generally suitable for parallel circuits, i.e.

2 motion sensors illuminate the same light, such as in hallways, stairwells.

• Wide range of uses: hallways, stairs, garages, workshops

Ideal for changing lighting in passageways.

Easily change lights and fixtures.

• Power range: 1-500W, suitable for resistive loads such as incandescent bulbs

1-200 W is suitable for inductive loads such as LED lamps or fluorescent tubes.

The removable frame adapts the motion detector to a known mounting series.

• Maximum range: 9 m
• Detection angle: 160°